When you need a PTI
Every motorcycle 125cc and below and moped registered in Jersey needs to be inspected every 2 years after it's 3 years old.
The inspection can be completed up to 2 months before its due date. The date the inspection is due is based on the vehicle's First Date of Use. This can be found on the registration document and will be the earliest date of registration.
Find out a vehicle's inspection (PTI) status
We'll notify the registered owner 2 months before the inspection is due. However, it's the registered owners responsibility to make sure that it's inspected in time.
When an inspection is not required
An inspection is not required if your vehicle is not being used on the road, for example it's being stored or restored. As soon as you intend to use you moped or motorcycle on the road, an inspection will be required.
You don't require an inspection if your moped or motorcycle is over 40 years old.
Booking an inspection
To make a booking call DVS on +44 (0) 1534 448600 or come in person to our offices.
The inspection costs £31 and must be paid at the time of booking.
If the inspection passes
If your motorcycle or moped passes the inspection, a Certificate of Satisfaction will be given to the person presenting the vehicle for inspection. The record of passing will also be held at DVS against the vehicle's registration record.
You will not need to display anything in your vehicle. However, the police may ask you to provide the Certificate of Satisfaction within a set time period if you're not able to show it at the time of asking.
If you're taking your motorcycle or moped outside Jersey, check the paperwork you're legally required to have in the country you're travelling in.
If the inspection fails
The person at the inspection will be given a failure notice showing the level of failure, and verbal explanation of why your vehicle has not passed.
If you're allowed to drive the vehicle away it may only be for a single journey or where you can get the necessary repairs done.
If you have repairs done and the vehicle passes the inspection within 30 days you'll only need to pay £15.50. You'll need to pay the full inspection fee again after the 30 days.
About the inspection and what it covers
The inspection will be carried out at the DVS facility at La Collette and takes around 15 minutes.
You need to bring the vehicle for inspection in a clean and roadworthy condition. We recommend that you have your vehicle serviced by a qualified mechanic before.
When you arrive at DVS you should report to reception. A DVS inspector will check your moped or motorcycle against the standards below and will advise you of the outcome.
What we'll inspect
Your motorcycle or moped will be inspected against the
DVS inspection check sheet for motorcycles and mopeds.
Find the detailed technical standards in the DVS Inspection Manual: Mopeds and Motorcycles.
The DVS inspection isn't the same as a vehicle service and so doesn't include the general mechanical condition of the vehicle.
The inspection covers:
|Registration plate, vehicle identification and frame numbers
- that they're present and legible
- operation and performance (efficiency test)
- system controls
|Steering and suspension
Components are secure in good condition and are effective:
- head bearings
- handlebars including grips
- swinging arm
- shock absorbers
Required lighting works correctly and are secure:
- headlamps are the correct colour
|Wheels and tyres
- condition and tread depth
- size and type
- correct fitment and valve condition
- free from cracks, damage and distortion
no corrosion which is likely to affect the steering, braking or integrity of frame
- for leaks
- security of its components
- presence of a riders seat
- that the seats are attached securely
- correct alignment of front and rear wheels
- works properly
- suitable for the vehicle
|Transmission and final drive
- that the chain or belt isn't too loose, tight or worn
- that the sprockets or pulleys aren't too worn and any guards are secure
- if shaft driven that the shaft is secure
- works properly over whole range
|Clutch lever (manual gear change)
- isn't bent, damaged or shortened so that it can't be easily used
- present and fitted securely
- secure and complete
- is correctly marked for road use
- it's not too noisy
- for excessive emissions
|Sidecars, if fitted
- for secure attachment
- suspension components
- wheel bearings and alignment
- lights and tyres